ortur laser master 2 pro lightburn settings

You can use the Ortur Laser Master 2 Pro laser engraver with free LaserGRBL software which works OK, but it is a little bit clumsy to use. We will test if this is true in real life application. This laser also has a 32-bit control circuit board, which should allow better motor control and better photo engravings. We are going to make some speed tests to see how it performs. But at such fast speed the quality should suffer a lot. I guess this is because they wanted to reach a very high engraving speed of 10000mm/min (which is very very high – Sculpfunn or Atomstack are rated at 6000mm/min max). It surprised us how small the laser head is compared to the Sculpfun or the Atomstack. We are going to test that later in this post.įixed focus means there are no moving parts in a beam’s way, which means that the focus can be narrower and focusing procedure is much quicker than with the adjustable focus. The laser diode is claimed to have a rectangular beam spot shape of 0.08mm x 0.15mm. Laser diode is a fixed focus diode which is great. Ortur Laser Master 2 Pro is advertised to be 20W input power rated. The Ortur Laser Master 2 Pro laser engraver come with a LU2-4 laser diode which outputs approximately 5.5W of optical power. The machine can be assembled in a good hour or a bit more. Screws and parts come in a few bags which are not labeled accordingly to the necessary step in the assembly manual.

The Sculpfun and Atomstack instruction manuals are easier to follow. It took us well over an hour to completely assemble the machine, because some of the steps were not so clear and we have forgot to slid some nuts in the aluminium profiles in an earlier step and the machine needed to be taken apart again to fix that. But compared to the Sculpfun or Atomstack manual, the Ortur assembly manual is a little bit less clear than the other two. Like the Sculpfun, or the Atomstack, the Ortur Laser Master 2 Pro laser engraver also comes with an assembly instruction manual which Is easy to follow. In this article you will find information that will help you decide if this machine is worth the extra cost to you.

Laser Master 2 Pro is their high-end machine, and it cost about 100$ more than the Sculpfun S9, or S6 Pro or an Atomstack A5 Pro we have tested previously. The Ortur is probably one the most popular laser engraver brands on the market.

Ortur laser master 2 pro lightburn settings